Created on 29 Oct 2018
Recycling made easy, one toss at a time
Part | Cost | Quantity | Total |
DF05BB Tilt/Pan Kit (5kg) | $29.92 | 1 | $29.92 |
Mechanisms that turn and tilt the plate | |||
Scotch Electrical Tape, 3/4-Inch by 66-Foot | $3.99 | 1 | $3.99 |
To keep stuff from falling apart. | |||
24’’x48’’ 1/8'' thick, ClearAdir Office Acrylic Plexiglass Sheet | $49.95 | 1 | $49.95 |
For the top panel of the trash sorting bin. | |||
Raspberry Pi Camera Board v2 - 8 Megapixels | $29.95 | 1 | $29.95 |
Camera for recognition | |||
CanaKit Raspberry Pi 3 B+ (B Plus) Starter Kit | $79.99 | 1 | $79.99 |
A Raspberry Pi will be programmed for image recognition. | |||
12" inch Wooden Circle Cutouts - Pack of 3 - By Woodpeckers | $13.99 | 1 | $13.99 |
This will be the plate that carries trash to their designated bins. | |||
Medium Density Fiberboard Sheets 24" × 36" x 3/8" | $14.43 | 3 | $43.29 |
Wooden MDF sheets to make wall panels for front of the trash sorter | |||
Disposable Cardboard Container for Waste, 5 Gallon Capacity | $3.65 | 3 | $10.95 |
Foldable cardboard trash bins | |||
Panel Mount 10K potentiometer (Breadboard Friendly) - 10K Linear | $0.95 | 1 | $0.95 |
Controls voltage supplied from the arduino | |||
BUDGET PACK FOR METRO 328 - WITH ASSEMBLED METRO ATMEGA328P | $29.95 | 1 | $29.95 |
We will use this with the arduino IDE to make our trash grabber move. | |||
Clear Enclosure for Arduino or Metro | $4.95 | 1 | $4.95 |
To prevent arduino from harm. | |||
Project Totals: | 15 | $297.88 | |
Track 1 Base Budget: | $250.00 | ||
Preferred Vendor Budget Bonus: | $50.00 | ||
Remaining Budget: | $2.12 |