First Person Space Invaders
Created on 08 Nov 2017
Because MinesweepAR wasn't hard enough.
We want to take the classic game of Space Invaders and build it in real life! We plan on implementing some combination of robots and projectiles with LEDS and magnets.
https://docs.google.com/a/andrew.cmu.edu/document/d/1BUi7P5sCNiHoQKyzO3zCwknLAuHs-594tSOJKpw-w1A/edit?usp=sharing
| Part | Cost | Quantity | Total |
| 1.5" screws | $6.17 | 2 | $12.34 |
| Screws to hold the frame together (100 pack) | |||
| Reed Switch | $8.88 | 1 | $8.88 |
| (10 count) Reed Switch for the switch | |||
| 2' x 4' 1/16" polycarbonate sheet | $23.46 | 1 | $23.46 |
| Polycarbonate sheet used for the front of the viewing area | |||
| 1" x 10' Magnetic Tape | $12.97 | 1 | $12.97 |
| Magnetic field for the reed switch | |||
| 5m Individually addressable LEDs strip | $34.99 | 4 | $139.96 |
| These LEDs will be used to allow the aliens to shoot back. | |||
| Motor Controller 29 | $9.99 | 6 | $59.94 |
| Actually controlling the motors. There may be slightly cheaper options available, but at stall curre | |||
| 2-Wire Motor 393 (276-2177) | $14.99 | 6 | $89.94 |
| Motors to drive gun system | |||
| Coat Hanger | $7.92 | 1 | $7.92 |
| Wire mount for the button | |||
| 3.25" Omni-Directional Wheel (4-Pack) and 3.25" Traction Wheel (4-Pack | $59.98 | 1 | $59.98 |
| Omni wheels and traction wheels are on the same page, please buy 1 pack for both (4 of each wheel) | |||
| Motor 393 Integrated Encoder Module (2-pack) | $29.99 | 3 | $89.97 |
| Encoders for the gun system. May not be strictly necessary. | |||
| 7.2V Robot Battery NiMH 3000mAh + Smart Charger v2 + Battery Charger P | $138.94 | 1 | $138.94 |
| All 3 of these are on the same page, please buy 4x 3000 batteries, 1 smart charger, and 1 power cord | |||
| Aluminum Plate | $22.26 | 1 | $22.26 |
| 12"x24" sheet (Cut into 4" square pieces) Conductor for button | |||
| Vinyl Sheeting | $22.55 | 1 | $22.55 |
| Vinyl sheeting to catch any BBs that ricochet | |||
| Grommet Kit | $8.36 | 1 | $8.36 |
| Grommet kit will be used to attach the vinyl to the frame, along with 3m hooks donated by team membe | |||
| Project Totals: | 30 | $697.47 | |
| Track 2 Base Budget: | $950.00 | ||
| Preferred Vendor Budget Bonus: | $0.00 | ||
| Remaining Budget: | $252.53 | ||
Reid Long
15 Nov 2017, 11:54 p.m. EST
Project Outline: https://docs.google.com/a/andrew.cmu.edu/docume...