Created on 07 Nov 2017
The ultimate couch potato tool... as long as you refill it occasionally
Part | Cost | Quantity | Total |
L293D Motor Shield | $8.99 | 1 | $8.99 |
To control the motors with arduino | |||
Parallax PAM-7Q GPS Module | $41.42 | 1 | $41.42 |
Used to help the cooler find its place in the world | |||
HMC5883L Compass Module | $8.99 | 1 | $8.99 |
A compass in order to let the cooler orient itself in the right direction of the GPS | |||
Sheherd Hardware 9610 6-in Wheels | $9.56 | 2 | $19.12 |
Wheels for the cooler | |||
Breadboard 3-pack | $7.99 | 1 | $7.99 |
Used for wiring in low level | |||
KEDSUM HC-06 Bluetooth RF Module | $7.99 | 1 | $7.99 |
Used for serial communication with the user | |||
Raspberry Pi 3 | $34.50 | 1 | $34.50 |
Used for high level | |||
HC-SRO4 Ultrasonic sensor x 5 | $9.79 | 1 | $9.79 |
Ultrasonic distance sensor for collision avoidance | |||
Igloo Ice Cube Roller Cooler (60 quart) | $24.44 | 1 | $24.44 |
Cooler to act as the vessel to carry the beverages | |||
FEETECH FS90R Continuous Servo x2 | $10.45 | 1 | $10.45 |
Servo motors to turn the wheels | |||
A000079 Motor Shield | $29.95 | 1 | $29.95 |
Used to control the two wheels of the cooler | |||
Arduino Uno | $29.99 | 2 | $59.98 |
Used for the electrical system | |||
Futaba S3003 Standard Servo | $12.72 | 2 | $25.44 |
For the actual drink delivery system from cooler to hand | |||
Project Totals: | 16 | $289.05 | |
Track 1 Base Budget: | $250.00 | ||
Preferred Vendor Budget Bonus: | $50.00 | ||
Remaining Budget: | $10.95 |