Created on 28 Oct 2018
Ever been so sad because there's no waves in Pittsburgh? Don't worry we got the machine for you.
Part | Cost | Quantity | Total |
24.0 kg-cm 4 Wire NEMA 23 Stepping Motor (57BYGH310) | $38.75 | 1 | $38.75 |
Motor to rotate the board | |||
SainSmart TB6600 CNC Micro-Stepping Stepper Motor Driver 4.5A | $19.99 | 1 | $19.99 |
Driver for the stepper motor | |||
12V power source | $10.99 | 1 | $10.99 |
This is the power source for the actual motor | |||
wood board | $36.30 | 1 | $36.30 |
This is the actual surf board | |||
962MXL Timing Belt, .080" Pitch, 77" Outer Circle, 1/4" Wide | $10.10 | 1 | $10.10 |
This part is the belt that will rotate the turntable | |||
MXL aluminum pulley 40T 8mm bore | $5.23 | 1 | $5.23 |
Bore to match the motor size | |||
1" 8020 72" aluminum extrusion (1010 profile) | $18.51 | 1 | $18.51 |
Aluminum extrusion to hold the turntable. | |||
M5 30mm socket head screws | $9.31 | 1 | $9.31 |
Screws needed for the motor mount | |||
F623ZZ 3x10x4mm Flanged Bearing | $9.18 | 1 | $9.18 |
Bearing for the belt tensioner | |||
Raspberry Pi Camera | $29.95 | 1 | $29.95 |
This part can be placed on the raspberry pi as an accessory | |||
Project Totals: | 10 | $188.31 | |
Track 1 Base Budget: | $250.00 | ||
Preferred Vendor Budget Bonus: | $50.00 | ||
Remaining Budget: | $111.69 |